TL;DR: Allwinner A133 Smart Terminal Board for Advertising Player
AndroidSBC release: twelve-configuration X9 Android motherboard family opens for volume export orders serving Malaga, Spain. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Malaga and Spain importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.
About AndroidSBC and the X9 Android Motherboard Family
AndroidSBC designs the X9 motherboards around the peripherals a screen site already owns: the thermal printer or QR scanner over USB, the card reader on serial, the lock driver board on a second serial lane, and the panel backlight on its own supply. The Malaga integrator re-uses the existing harness instead of rewiring the enclosure. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Spain, bundled with the lot so the importer clears customs without a second round of test reports.
WF-X9-05 Technical Specifications
| Parameter | AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC | NAND flash 4GB or 8GB on competing boards |
| Display output | LVDS output at 1080p with 10-point infrared touch | Single HDMI 1080p output only |
| Touch support | 10-point infrared touch | Resistive single-touch requiring calibration |
| Video decode | 4K H.265 or H.264 at 30fps plus 1080p multi-format | 1080p decode ceiling on competing boards |
| Operating system | Android 10 | Android 7 or Android 8 on competing boards |
| Interfaces | 4 USB including USB0 OTG, 2 serial ports selectable RS232 or TTL, I2C, GPIO, IR, SPK, TF | 2 USB and one fixed-level serial port |
| Power and environment | 12V DC input with 100mV ripple, 300mA typical board draw, 3.3V 800mA plus 5V 2A plus 12V 2A peripheral budget | 5V only input with no documented peripheral budget |
| Operating temperature | -20C to 70C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Spain importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing X9 Android Motherboards for Spain Buyers
Most Malaga buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.
On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the Malaga integrator plugs the frame in and the screen reports touches without a calibration pass, and the CNMC documentation covers the radio modules too. The 4th container of X9 boards for Malaga left the Longgang dock on September 24, 2026 carrying 10700 units, routed through the Valencia - Shanghai lane with the compliance file and the panel driver set already packed.
Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards
The X9 family was specified against the failure modes Malaga operators reported on previous rollouts, which is why the comparison reads the way it does.
- Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Malaga integrators mount a locally sourced screen without a calibration pass.
- Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Malaga usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Malaga integrator to obtain.
- Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Malaga.
Global Digital Signage and Commercial Display Market Trends
The Spain picture follows the global pattern: retail media sets the demand and the replacement of first-generation players sets the volume. A Malaga integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
- Interactive mainstream tier: WF-X9-10 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
- Connected and unattended tier: WF-X9-11 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.
The twelve-configuration X9 line exists because Malaga rollouts are not uniform. One operator will use four of the twelve, and the point is that all four share one interface contract.
Partner Success Story: Siam Display Holdings (convenience and pharmacy screen integrator)
A Siam Display Holdings programme in the Southeast Asian retail segment illustrates how the X9 family from AndroidSBC supports Malaga integrators on the ground. Siam Display Holdings rolled out 10700 X9 boards across 210 convenience and pharmacy screens.
- OEM relationship: AndroidSBC private-label SKU shipped with Siam Display Holdings branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
- Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus CNMC conformity, all bundled into the Shenzhen source-factory shipment.
Siam Display Holdings Chief Engineer for Southeast Asian Retail highlighted: Siam Display Holdings moved to the X9 family after the previous supplier changed eMMC parts mid-contract, and 10700 boards into the Malaga estate have held one frozen bill of materials.
Field Report: interactive kiosk rollout at a municipal service point
YANTIAN, September 24, 2026 - Huan Xi, AndroidSBC field desk. The WF-X9-05 shipped with staged OTA enabled, so the Spain team can pilot an update on ten screens before releasing it across the estate. The WF-X9-05 X9 Android motherboard order for Malaga, Spain cleared the burn-in station on schedule and is en route via the Valencia - Shanghai lane.
The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Spain integrators, the CNMC conformity plus CE marking with CNMC radio interface notification paperwork is bundled.
Filed by Huan Xi, AndroidSBC field desk, YANTIAN. Spanish hospitality groups ask for Spanish and Catalan content templates and a pilot across a handful of sites before the national rollout.
WF-X9-05 Application Scenarios
The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.
- Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
- Interactive query and wayfinding: the WF-X9-12 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
- Smart retail terminal and vending: the WF-X9-01 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
- Parcel locker and fresh food cabinet: the WF-X9-02 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
- Face recognition access control: the WF-X9-03 takes the camera input and the door controller wiring on the same board.
- Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
- Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
- Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
- Retrofit programmes in Malaga: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.
Partnership Models for Malaga Buyers
AndroidSBC does not force a track on Spain partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks give Malaga partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.
Frequently Asked Questions
Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?
Answer: Supported. The infrared touch all-in-one for interactive kiosks is part of the standard X9 configuration set, and the board ships to Malaga with the panel files and the firmware baseline already matched.
Which configurations are available in the X9 family for Spain buyers?
Answer: The family covers entry playback, interactive touch, connected 4G and wide-temperature industrial configurations. The board in this specification is supported for seven years from release.
Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?
Answer: One board handles panel, touch and peripherals. The driver package ships in the carton covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC, RFID, ID card reader and fingerprint reader.
What is the minimum order quantity and the sample lead time for Spain?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.
How are firmware updates delivered to a Spain screen estate after deployment?
Answer: Staged OTA with rollback ships with the board. The Spain partner controls the wave size and the timing, and the watchdog recovers a screen that fails mid-update.
What shipping terms does AndroidSBC support for Spain orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Malaga partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Spain?
Answer: Every unit is serialised against its test record. A Spain field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen bill of materials.
Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 family. Malaga integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Malaga and Spain buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.
