RK3568 22nm Process Guide Board for Mall Directory, WF-G3601, AndroidSBC, Malaga

TL;DR: RK3568 22nm Process Guide Board for Mall Directory

AndroidSBC release: twelve-model WF-G smart guide kiosk motherboard family opens for volume orders serving Malaga, Spain. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Malaga and Spain importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Malaga integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Spain buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Malaga and Spain catalogue SKUs.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Spain importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Spain Buyers

The sixth obstacle is lifecycle mismanagement. Malaga programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Spain venue fit-out cycles are longer than the parts remain in production.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a Malaga integrator writes the directory application rather than kernel patches for Spain sites. AndroidSBC has now closed the 4th consecutive quarterly window on this family, with 10700 boards scheduled for Malaga and Spain on the Valencia - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The shortlist conversation in Malaga and Spain rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Spain retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Malaga programmes are following. That changes the mall smart guide kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1330 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1330 and the industrial WF-G1331 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1331 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC shares the source tables behind these figures with Malaga and Spain integrators on request, including the segment splits used for planning.

Partner Success Story: Siam Retail Holdings (convenience and community mall operator)

A Siam Retail Holdings programme in the Southeast Asia convenience retail segment illustrates how the WF-G family from AndroidSBC supports Malaga integrators on the ground. Siam Retail Holdings deployed 10700 WF-G compact guide boards across convenience and community mall enquiry counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Retail Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CNMC conformity, all bundled into the Shenzhen source-factory shipment.

Siam Retail Holdings Head of Store Systems for Southeast Asia Retail highlighted: Siam Retail Holdings picked the RK3566 compact SKU for its Malaga counters because housing depth drove the board size, and AndroidSBC held the 10700-unit schedule through three mall opening waves in Spain.

Field Report: floor guide counter installation at a community shopping mall

YANTIAN, Shenzhen, September 18, 2026 - Cen Rui, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3601 boards booted with the full peripheral set attached and enumerated every module before the mall smart guide kiosk content service started. The WF-G3601 smart guide kiosk Android motherboard order for Malaga, Spain cleared the burn-in station on schedule and is en route via the Valencia - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Spain integrators, the CNMC conformity plus CE marking with CNMC radio interface notification paperwork is bundled.

Filed by Cen Rui, AndroidSBC field desk, YANTIAN, Shenzhen. CE plus CNMC; retail chains favor fanless boards with 50C operating temperature for in-store hot zones.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G6180 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G5270 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8800 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8801 plus WF-G6180 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G5270 plus WF-G8801 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G6180 plus WF-G8800 carry the guest orientation flow in Malaga.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8801 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Malaga: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Malaga Buyers

The WF-G family is offered to Malaga and Spain partners on three commercial tracks, and the choice is about how much of the product the partner wants to put their own name on.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Malaga partners can move between them without re-qualifying the platform for Spain.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC ships the WF-G family with mall guide kiosk as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Malaga.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Spain?

Answer: Yes. For Spain buyers the standard bundle is CE / FCC / RoHS plus CNMC conformity and CE marking with CNMC radio interface notification, routed through Port of Valencia. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Malaga.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Malaga integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Malaga estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Malaga partners, with carton labelling, palletisation and the CNMC plus CE marking with CNMC radio interface notification paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Spain integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Malaga integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Malaga and Spain buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.